Safety Recalls

Voluntary Safety Recall – Kinderkraft Mink Car Seat

During a regular quality control, a deviation was discovered which did not meet the high quality standards of the Kinderkraft brand, although it meets the requirements of ECE R44 / 04. A defective handle clamping component was discovered. It may affect the safety of the child during transport; however, only a fraction of the sold car seats from a limited production lot had this component. We have not received any information regarding accidents connected to this potentially defective component.
If you have a MINK car seat, follow the instructions below to find out if your car seat needs to be verified.
How to find the lot number
The lot number (B) is located on the label under the seat. The lot number starts with “KK2019”.
Products subject to the verification programme bear the lot number (B) between:
KK20190314 – KK20190630
Fill in the below form:-
If you have any questions, please contact our Customer Service Department at

Product Recall Notice Koodi Seat Me Safe Travel Seat – KD066/02


We have become aware that the drawstring on this product may present a potential strangulation hazard


  • Stop using this item immediately
  • Keep away from children
  • Please contact Koo-di directly using the contact details below with proof of ownership to arrange a refund or credit
Telephone number: 01384 298531 (Mon-Thurs 09:00-17:00, Friday 09:00-16:00)

Product Recall Notice – Red Kite 3 Way Carrier

Voluntary Recall For Britax DUALFIX Sold Nov. 2017 – Mar. 2018

Janod Trolley Recall

Babymoov Soother Holder (A106606/7/8/9) Recall

Tests on some soother holders have been undertaken by UL laboratory at the request of Belgian and Bulgarian consumer protection services. According to this laboratory the product and more precisely the garment fastener has broken during the impact test (requested by the soother holder standard). If this were to happen, there is a risk that the remaining broken parts might be ingested by the child. They have therefore asked Babymoov to recall and withdraw the Babymoov soother clip A106606/7/8/9 from the market.
Any customers in possession of the aforementioned clips are invited to contact Babymoov directly at so that the necessary steps can be taken to remove the clip from circulation.

Babymoov Statement: FDA Guidelines on Sleep Positioners

Further to the recent news relating to re-issued advice from the US Food & Drug Administration (FDA) concerning sleep positioners, advice which originated following 12 deaths in the US between 1997 and 2010, whereby infants were placed on their side to sleep using a sleep positioning device, Babymoov’s Cosydream has been highlighted in several articles. The company has released the following statement:
We would like to assure customers that our award winning, paediatrician-approved Cosydream has never been involved in any incident connected with infant fatality. Nor does the Cosydream resemble the products that first gave rise to the FDA guidelines seven years ago.
Please note that our Cosydream has never been sold in the United States and thus can’t be involved in the incidents related in this article.
Over 100,000 Cosydream units have been sold to satisfied customers worldwide since the product was first launched 4 years ago, during this time it has been met by wide acclaim.
The design of the Cosydream enables babies to sleep safely on their back in accordance with recommendations by the NHS. Using the Cosydream after feeds can help provide babies relief from symptoms of colic and reflux, it can also help prevent the onset of Plagiocephaly. The product is specifically designed for use from birth and, as per our guidelines, should not be used when baby is able to turn independently.
All our products comply with current regulations and the appropriate certification has been attained in relation to each of our baby sleep products.
In light of the information provided to us by Babymoov, we are unable to accept returns for refund on products implicated in the various media reports regarding sleep positioners beyond the reasons for refund detailed in our standard terms and conditions. This does not affect your statutory rights.*

Replacement iCandy Buckle and Crotch Strap for the Peach 2016, and Designer Midnight Editions

As part of our on-going monitoring programme, we recently identified a very small number of iCandy buckles that have broken in use. This can result in the crotch strap coming away from the centre of the buckle. This relates specifically to the Peach 2016 model (batch E10799 to batch E10910) and the Peach Designer Collection Midnight Edition. We would like to stress that the waist and shoulder harness is not affected. It should also be noted that the likelihood of the buckle failing is extremely low.
When taking into consideration all of the information at our disposal, including reviewing all returns data, testing the products and also performing routine risk assessments, we have taken the decision to offer a replacement buckle and crotch strap, at no cost, to all customers that have products within the affected batch range. The replacement buckle is new and improved with added strength integrated into the part.
We would advise all customers to use the 5-point harness at all times when a child is in the seat unit and ensure that all harness straps are adjusted correctly to suit the age and size of the child.
Should you require any assistance with replacing your waist harness strap, please see details below.
For removal or fitting instructions please click on the video link below and use the password iC2016* to access your guide to replacing your buckle.
We would like to take this opportunity to sincerely apologise for any inconvenience this may cause to our customers. We take the safety of our products very seriously and our Technical Team continually review all products as part of our ongoing improvement initiative.

Brother Max Carry & Hang Nightlight – Bunny

Brother Max Carry & Hang Nightlight – Bear

Brother Max has identified a potential safety issue with their Carry & Hang Nightlights following an isolated incident where the product overheated. The incident is being fully investigated and due to the potentially serious nature of the risk and their commitment to safety, they have taken a precautionary decision to voluntarily recall this product until further notice.
If you are in possession of this product, you should stop using it immediately and unplug at the mains. Please then e-mail the below helpline.
Monday to Thursday 9.00am to 5.00pm
Friday 9.00am – 3.00pm

iCandy Peach 2016 model (batch E10799 to batch E10896)

Register for a new improved buckle directly through the iCandy website via this link http://www.icandyworld. com/uk/en/support/form/

KinderKraft Easy Swing

Due to regulation changes regarding the use of electrical adaptors and conversion plugs, we have been advised that the EU AC Adaptor and conversion plug supplied with this product no longer complies with the latest guidelines. In order to resolve this non-compliance we are able to send you a UK AC Adaptor. If you would like a replacement adaptor then please complete this form: order a replacement cable. Once we have received this information your new UK AC Adaptor will be dispatched along with a returns postage stamp to return the original EU Adaptor and conversion plug at your earliest convenience.

Ickle Bubba v2 and v3 Stomp

Further details on the product safety improvement notice for the Ickle Bubba Stomp v2 and v3.

Mamas & Papas Armadillo Flip and Armadillo Flip XT

Further details on the safety checks for the Mamas & Papas Armadillo Flip and Armadillo Flip XT.

LeapFrog Scout & Friends Baby Walker (Detachable Phone Part ONLY) Voluntary Recall

Cosatto Giggle Watchdog Details

Further explanation and details on the recent Watchdog investigation into the Cosatto Giggle.

Joie Stages Recall

Further details on the recall of a limited batch of Joie Stages car seats.

Britax BABY SAFE Voluntary Recall

Britax have identified a potential quality issue with the handle on certain BRITAX BABY-SAFE infant carriers.
This relates to certain infant carriers that were purchased between 1 February 2012 and 31 March 2012.
If you purchased a BRITAX BABY-SAFE infant carrier between these dates, please click here to read the safety bulletin on the Britax website, and to see if your carrier is affected.
Full details are available if you click on the link above. If you require further information please contact Britax on +44 (0)1264 386 034 or via email

Phil & Teds Improved Mechanism for fitting brakes to Explorer and Hammerhead Strollers

Whilst the previous construction (Series 1; January 2011 and earlier) passed all safety certification, testing of the new method of fitting brakes has shown it to be significantly more durable.
Phil & Teds implemented the upgrade in production some months ago, creating “Series 2” Explorer and Hammerhead buggies. Series 1 Explorer and Hammerhead buggies are identifiable by serial numbers between 0610/0001 and 0111/4788.
No other stroller is affected. Our solution is a simple frame swap that, in the case of the Explorer can be implemented easily at home by the customer, or for the Hammerhead at our repair centre.
Any customer potentially qualifying is best to register on-line for the free frame swap via the Phil & Teds website: Alternatively they can call our customer care team on 01234 344230 or email We will then send a frame kit direct to them, which will include full instructions.

Phil & Teds Sport V2 / Classic V1 Buggies Issue of Free Hinge Covers

Phil & Teds have announced their intention to issue free hinge covers for the discontinued Sport V2 and Classic V1 buggies. This action is in response to a small number of reported cases of adult users getting a finger caught in the hinge, causing injury.
The kit consists of a simple plastic cover that can be slotted into place on the affected buggies hinge, preventing fingers from being inadvertently placed in the hinge when the user is folding the buggy.
Any affected customers can request a kit to be sent to them free of charge via the Phil & Teds website:

Cosatto Stratford Cot Bed in White or Nut manufactured between 01/09/2005 and 18/03/2009

Cosatto have developed a safety enhancement device for the above mentioned product which improves the security if it is moved or lifted for any reason.

Due to the two piece cot bed end construction, it is possible to create a gap between the lower and upper cot bed leg sections, with the possibility of injury to parent or child. It is also possible that, in some cases, partial disassembly of the drop side mechanism may occur, rendering the cot bed unsafe.
If you think you own a Cosatto Stratford Cot Bed, in either white or nut finish, please check the Product Description Label. Then check the Date Code Label to see if your cot bed is affected. You will find these labels on the mattress base slats.
The only versions affected have Date Code Labels dated from 01/09/2005 to 18/03/2009 (inclusive) and were sold throught UK and Ireland.
Please note: Stratford Cot Beds manufactured after this date are unaffected.
Once you have carried out the above checks and you think you may have a Stratford Cot Bed that is affected, please contact Cosatto immediately via 0871 977 3900 or via email at
Cosatto will send out, by return post and without charge, a component, an Allen key and fitting instructions to enable you to easily complete the safety enhancement.

Fisher Price Rainforest Open Top Take Along Swing – Model K7195

The space between the seat and frame can pose an entrapment hazard to the occupant.

You can call Mattel on 01628 500303 for more information.

Lindam Soft-Sided/Fabric Playpen – Model LD123 – 44373/44483

Lindam have identified a small potential safety risk with the soft-sided playpen. A small assembly bolt may work itself loose and detach from the product which may potentially cause a choking hazard. As a precautionary measure if you have one of these items purchased before 16th February 2009 stop using it immediately. Please return the product to our store in Grantham for a refund or exchange. This notice is for all colour variants of the soft-sided playpen only and does not affect the Lindam Safe and Secure Metal Playpen or any other Lindam product. If you have any queries please call 0871 7021000.

Britax Viva/Nexus Stroller

Britax Excelsior Ltd have decided to provide a free remedy kit for its Viva and Nexus stollers. The remedy kit contains two hinge covers for added protection and will be available for all Viva and Nexus strollers.

All customers who own a Viva or Nexus stroller and would like to order the free remedy kit should contact the Britax customer support at 01264 386034 or

* For more information please see the Citizens Advice Consumer Help page.

iCandy Orange Bumper Bar

We would like to take this opportunity to request users to carry out a visible check of their product. This can be done quickly by removing and assessing the bumper bar, see images below for reference.


If required, a new bumper bar can be requested by telephoning customer services or going online,
details of which can be found below:
Telephone: 01767 604400

iCandy Peach 2018 Bumper Bar

We would like to take this opportunity to request users to carry out a visible check of their product. This can be done quickly by removing and assessing the bumper bar, see images below for reference.

Please contact iCandy customers services, details of which can be found below:
Telephone: 01767 604400, Option 1

Scroll To Top
0 Cart

My Cart

Shopping cart is empty!

Continue Shopping